Hubs

$129.99
- Weight optimized, gravity inspired front hub
- 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Compatible with 32 HEX front hub adapters only
- Advanced seal system improves prevention of bearing contamination

$129.99
- Weight-optimized, gravity-inspired front hub
- 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Compatible with 32 HEX front hub adapters only
- Advanced seal system improves prevention of bearing contamination

$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination

$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance

$143.99 - $144.99
Shimano Alfine Center Lock Dynamo Front Hub
- Compatible with 26 to 28-inch wheel sizes
- Light alloy QR lever and nut
- 6V, 3.0W output
- Centerlock rotor mount
- Spoke Interface: J-Bend
- Weight: 575g

$189.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Proper positioning with 12mm E-THRU
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Effortless setting of disc rotor
- Durable sealing performance

$244.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
- Rotor lockring not included
- Hub Center to Flange: 30.0mm
- Hub Drilling: 32-hole
- Flange Diameter: 92.5mm
- Drivetrain Speeds: 8
- Spoke Interface: J-Bend

$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface

$21.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings.
- Double contact sealing
- Super polished bearing races for low-friction rolling

$28.99
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze.
- Hub/Brake Compatibility: Center-Lock Disc
- Axle Type: QR
- Axle Length: 100mm

$40.99
Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.

$68.99
Shimano XT FH-M756 Series Rear Hub
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-Bolt rotor mount
- Bearing Type: Loose Ball
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed
- Center to Flange, Left: 33.5
- Center to Flange, Right: 20.5
- Flange Diameter Left: 61
- Flange Diameter Right: 61
- Hub Drilling: 32
- Hub/Brake Compatibility: 6-Bolt Disc
- Rear Axle: QR x 135mm
- Skewer Included: Yes
- Spoke Interface: J-Bend
- Weight: 495 grams

$56.99 - $75.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)

$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance

$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology.
- The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring
- Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Durable sealing performance

$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance

$77.99
- Series : DEORE XT
- Disc Rotor Mount : Center Lock Disc
- Axle Type : 12mm thru-axle
- Axle : 12x148mm
- Contact Sealing : Labyrinth & Contact
- Spoke Holes : 32H

$60.99
Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.

$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only

$219.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10-degree engagement
- 32h spoke count
- For J-Bend spokes only

$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available

$747.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

$714.90 - $733.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm

$383.90
Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

$476.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
Page 1 of 2
Next page